Software
You can download, below, CamTrace Server updates and CamTrace Client software.
For information: if you have trouble downloading, you have to right-click on the link and then ‘Save link as’.
To download a complete distribution of CamTrace (ISO image) for a new installation, please visit our FTP site: “ftp://ftp.camtrace.com“. A password is required, please contact us.
♦ Why update? It is highly recommended to (systematically) keep the CT-Server updated to the latest version. This allows you to benefit from the latest features and the most recent security patches. A CT-Server that is not kept up to date is obsolete, and therefore potentially vulnerable to cyber attacks. It is also important to backup important recordings before an upgrade. In very rare cases (especially on older CamTrace versions), it is possible to lose some recordings. You can install an update of CamTrace if the build (release) date of the new version (the one you want to install) is before the end date of your update contract. So even if your maintenance contract has expired, you can later install all the versions you were entitled to during the validity of your contract. To update a CamTrace, download the update on a client workstation then follow the procedure described in the documentation. The update is done from the web interface and requires an upload from the client computer to the server. If the conditions described above are met you do not have to enter a new activation key. If the update you downloaded has a build date later than the end date of your update contract, you will get a warning message at the end of the upload to the server. You will then be able to abandon the update or force the update, while waiting for a valid activation key. Be careful, in the latter case the server goes into demo mode and will not be functional anymore until you enter the new key. To obtain a new key, you must either renew your maintenance contract (CM) if it has expired less than 6 months ago, or subscribe to an update without a maintenance contract (MAJHC). If you do a software update by “skipping” several intermediate versions, remember to install the latest available version of the system update. Client workstation updates To verify the integrity of a download, a string called “Md5 checksum” is available for each link below.Server updates
♦ Terms of access to updates
Before each update, remember to save the configuration of your CamTrace. From the web interface, in administration configuration click on: save the configuration.♦ Software updates, system updates and migrations
CamTrace updates, both software and system updates, are cumulative. Therefore, you do not have to go through all the intermediate updates. Software updates occur before system updates.
Migrations are required to access the higher versions. They cannot be skipped.
For clients running Microsoft Windows or MAC, simply download the client software, which comes in the form of an executable. The installation procedure will uninstall the previous client and replace it with the new one.
CamTrace Server updates
Before any action, please save your configuration (“Manage” > “Configuration” > “Save this configuration”), and your important recordings. You have to install the update packages using the web administration interface, in the “Help” menu then “CamTrace Update”. CT-Server service will be down during the update. CamTrace Update — Sirion 16 If your CT-Server is in ‘8.15.x’ version, you cannot upgrade. You must reinstall (from scratch) the OS with the ISO image (read ‘CamTrace installation Guide’). V9.16.2.1 installation, version published on January 1rst, 2025 : CT-Server System (Version 9.16.2.1-20250113) – part 1 (system update, to be installed first) CT-Server update (Version 9.16.2.1-20250113) – part 2 (software update, to be installed second) V9.16.2.1 installation, version published on December 17th, 2024 : CT-Server System update (Version 9.16.2.1-20241217) – part 1 (system update, to be installed first) CT-Server Software update (Version 9.16.2.1-20241217) – part 2 (software update, to be installed second) > This version contains the latest security patches. V9.16.2.1 installation, published on July 24th, 2024 : CT-Server System update (Version 9.16.2.1-20240724) – part 1 part 1 (system update, to be installed first) CT-Server Software update (Version 9.16.2.1-20240724) – part 2 part 2 (software update, to be installed second) V9.16.2 installation, published on September 21th, 2023: CT-Server System update (9.16.2-20230921 version) – part 1 (system update, to be installed first) CT-Server Software update (9.16.2-20230921 version) – part 2 (software update, to be installed second) Warning : The PTZ protocols integrated into older CT models (which are neither ONVIF, VAPIX nor ISAPI) are no longer supported. It will be necessary to redetect the cameras concerned using the new protocols (ONVIF, VAPIX, ISAPI). V9.16.1 installation, published on February 2nd, 2023: CT-Server System update (9.16.1-20230222 version) – part 1 (system update, to be installed first) CT-Server Software update (9.16.1-20230222 version) – part 2 (software update, to be installed second) V9.16.0 installation, published on September 28th, 2022 : CT-Server System update (9.16.0-20220928 version) – part 1 (system update, to be installed first) CT-Server Software update (9.16.0-20220928 version) – part 2 (software update, to be installed second) CamTrace Update — Nova 15 (this version will be obsolete soon) V8.15.2.2 installation, published on December 2nd, 2021 : This document explains if you can upgrade to V8.15.2.2. If your CT-Server is in version 8.15.x, it is strongly advised to update to 8.15.2.2 as this version includes security patches. If your CT Server is running a version below V8.15.0 : if you want to update to V8.15.2.1, you have to upgrade first to V8.15.0 (it will be a 2-steps upgrade : first to V8.15.0 then to V8.15.2.1). CT-Server Software update (8.15.2.2-20221207 version) – part 1 (software update, to be installed first) CT-Server System update (8.15.2.2-20221207 version) – part 2 (system update, to be installed second) > Security patch : download here. How to install : read me (french). V8.15.2.1 installation, published on December 1rst, 2021 : If your CT Server is running a version below V8.15.0 : if you want to update to V8.15.2.1, you have to upgrade first to V8.15.0 (it will be a 2-steps upgrade : first to V8.15.0 then to V8.15.2.1). CT-Server Software update (8.15.2.1-20211201 version) – part 1 (software update, to be installed first) CT-Server System update (8.15.2.1-20211201 version) – part 2 (system update, to be installed second) V8.15.2.0 installation, published on October 7th, 2021 : If your CT Server is running a version below V8.15.0 : if you want to update to V8.15.2.0, you have to upgrade first to V8.15.0 (it will be a 2-steps upgrade : first to V8.15.0 then to V8.15.2.0). CT-Server Software update (8.15.2.0-20211007 version) – part 1 (software update, to be installed first) CT-Server System update (8.15.2.0-20211007 version) – part 2 (system update, to be installed second) V8.15.1 installation, published on March 2nd, 2021 : You can only install the 8.15.1 version if your CamTrace Server’s version is V8.15.0 or V8.14.1.3. CT-Server Software Update (8.15.1.0-20210302 version) – part 1 (software update, to be installed first) CT-Server System Update (8.15.1.0-20210302 version) – part 2 (system update, to be installed second) V8.15.0 installation, published on March 1rst, 2021 : You can only install the 8.15.0 version if your CamTrace Server’s version is V8.14.1.3. Important : From V8.15.0, the old CamTrace Mobile app (for smartphone) is not compatible anymore. You will have to download the new CamTrace Mobile app (named “CamTrace Mobile V2”) on AppStore/PlayStore. CT-Server Software Update (8.15.0.0-20200301 version) – part 1 (software update, to be installed first) CT-Server System Update (8.15.0.0-20200301 version) – part 2 (system update, to be installed second) CamTrace Update – Nova 14 (obsolete version) V8.14.1.3 installation, published on December 9th, 2019 : CT-Server Software Update (8.14.1.3-20191209 version) part 1 (software update, to be installed first) CT-Server System Update (8.14.1.3-20191209 version) – part 2 (system update, to be installed second) > Security patch : download here. How to install : read me (french). V8.14.1.2 installation, published on July 8th, 2019 : CT-Server Software Update (8.14.1.2-20190708 version) – part 1 (software update, to be installed first) CT-Server System Update (8.14.1.2-20190708 version) – part 2 (system update, to be installed second) CamTrace Nova 14 update – with change of the Linux kernel (without change of the Linux version). (obsolete version) V8.14.1.1 installation , published on March 6th, 2019 : CT-Server Software Update (8.14.1.1-20190306 version) – part 1 (software update, to be installed first) CT-Server System Update (8.14.1.1-20190306 version) – part 2 (system update, to be installed second) Migration CamTrace Nova 14 – Change of Linux version – Mandatory step to upgrade to higher versions. (obsolete version) To install V 8.14.1.0 – Based on Linux version 16.04 LTS kernel 4.4 – from V 7.14.0.2 or 7.14.0.3 or 7.14.0.4 This migration, more important than an update, will result in two system reboots – This migration is a must for higher versions of CamTrace. What you need to know before making this migration Precautions to be taken Migration notes in the format .pdf CamTrace Server Migration Verification Update (Version 8.14.1.0 dated 12-11-2018) – Part 1 (migration verification tool, to be installed first) CamTrace Server Migration Update (Version 8.14.1.0 of 12-11-2018) – Part 2 (system migration, to be installed second) CamTrace Update – Nova 14 (obsolete version) To install V 7.14.0.4 – Based on Linux version 14.04 LTS – from all previous versions 7.13 or 7.14. Patch can be installed without active support conditions for holders of versions 7.14.0.2. or 7.14.0.3. CamTrace Server software update (Version 7.14.0.4 from 12-07-2018) If you are upgrading from a version prior to 7.14.0.2 don’t forget to install the CamTrace Server System Update (Version 7.14.0.2 dated 12-07-2018) – part 2. CamTrace Update – Nova 14 (obsolete version) To install V 7.14.0.4 – Based on Linux version 14.04 LTS – from all previous versions 7.13 or 7.14. Software update CamTrace Server (Version 7.14.0.3 of 12-07-2018) If you are upgrading from a version prior to 7.14.0.2 don’t forget to install the CamTrace Server System Update (Version 7.14.0.2 dated 12-07-2018) – part 2. CamTrace Update – Nova 14 (obsolete version) To install V 7.14.0.2 – Based on Linux version 14.04 LTS – from any previous version 7.13. CamTrace Server Software Update (Version 7.14.0.2 as of 07-12-2018) – Part 1 (software update, to be installed first) CamTrace Server System Update (Version 7.14.0.2 of 07-12-2018) – Part 2 (ssystem update, to be installed second) CamTrace Update – Nova 13 (obsolete version) To install V 7.13.2.4 – Based on Linux version 14.04 LTS from any previous version 7.13. CamTrace Server Software Update (Version 7.13.2.4 of 17-01-2017) – Part 1(software update, to be installed first) CamTrace Server System Update (Version 7.13.2.4 of 17-01-2017) – Part 2 (system update, to be installed second)
Md5 checksum : a7d508e82d8ae9bfc5a7171d9defe7e6
Md5 checksum : 34cc6853a33a9716147378d6c615283d
Md5 checksum : ace4080dece763c888934b0c823a77b6
Md5 checksum : f73facacae3ec7f64faa54d23e16e5a8
Md5 checksum : faafc2b8c64ece1040bf26f991462224
Md5 checksum : d56c834cd260c9586b244c4ce70689c7
Md5 checksum : 22374bb08890d037d39ecf9370677228
Md5 checksum : b942531793580e0544b3b46745531d88
Md5 checksum : aeaa1db7d38c47de2f5603436a65448d
Md5 checksum : 1c0cae5b771ed5b0b590da26d8c2bd6a
Md5 checksum : 3015c777b4be9dc648f61db48236e51d
Md5 checksum : 86b76064d83aadfb244466eb29f90701
Md5 checksum : 2564fc23335acb6edaff12702943ebcb
Md5 checksum : 03b09829694e4029ceb4bb3b6408ac50
Md5 checksum : 0d81e0562dea95bbaeb06bb8b105e3b6
Md5 checksum : 846b3cbba29f2657c1e26a94bcbcb267
Md5 checksum : e0104aa02f8a86e8aa19b7beb3de0ff1
Md5 checksum : 18399e76d4a2b34ccd6be226b130b888
Md5 checksum : 2b743a270bc5aa965cec660faa3c47bb
Md5 checksum : 065b3764247224e28a1e55f4dc0bc49f
For reasons code optimization and speed of execution reasons, Nova 15 requires at least processors supporting the Nehalem architecture. The old processors type E7400, E7500, Q8400 are thus not compatible with Nova 15. In this case, an upgrade to new hardware is mandatory.
Md5 checksum : e4a0f848587f7178ff69c7432c2e3adb
Md5 checksum : 9bed51eb13bad9583cc0ad94fddbcc96
Md5 checksum : 63c21be83d73b9d192c98077bb9cc046
Md5 checksum : 92a8aee6568fe89ff97a98cf0cb6ac7a
Md5 checksum : f53e816dde6ccff61b0742b6e51f320e
Md5 checksum : 45ae0b6d9b94be0b7c87b90322aca86c
Md5 checksum : 1e77dc4a24a8bade8d4a40fea5f1edbe
Md5 checksum : 6dc60718418333de49f9cfc85204a58f
Md5 checksum : 4c8bffd85890a3ba8c18be8565cbb1ab
Md5 checksum : a9addebab6be0cac89514a3c874add40
Md5 verification: 257b6b4d1da8a8613555cd124f2595fb
Md5 checksum : e8a3f412f922427017a13aa24d74990e
Md5 checksum : bb1d20280b274749b150be8607127c2e
Md5 checksum : e68d576d22d7568fad9930b6ed5455e5
Md5 checksum : b4519edde58f1dbf41f724dd65b28995
Md5 checksum : f619879ee2f719512efa2c5de45cc592
CamTrace Client software
CamTrace Client software CamTrace Client software is backward compatible with the old server versions of CamTrace (Nova 14, Nova 13 and up to version 6.12.7.5). To install CamTrace Client on MacOS : right-clic the icon, then chose ‘Open’. Then ‘Open’ again. > Version 2.5.48 : > Version 2.5.41 (improved decoding using the latest available libraries, which may require more powerful display workstations than in versions 2.4) : CT-Client for Linux (.deb). Command line installation only. > Version 2.4-390 (recommended if the CT-Server is in 9.16 version) : CT-Client for MacOS (not compatible with macOS Sequoia 15.1) CT-Client package update (to be installed on CT-Server console) > 2.3-162 version : Older versions of the CamTrace Client software Compatible with the CamTrace Nova 13 and Nova 14 servers: CamTrace Client for Windows (Version 2.2.5-10 of 20-02-2019) Client CamTrace for MacOS (Version 2.2.5-10 du 20-02-2019) CamTrace Client for MacOS (Version 2.2.5-10 of 20-02-2019) Client CamTrace pour MacOS (Version 2.2.1-6 du 06-07-2018) CamTrace Client for Windows (Version 2.1) CamTrace Client for MacOS (Version 2.1) Compatible with older CamTrace server versions 6.11.4.10 and 6.12.7.5 : CamTrace Client for Windows (Version 1.5) CamTrace Client for MacOS (Version 1.5)
Md5 checksum : ee6eae523d08e56f18362442fc62feda
Md5 checksum : 4ec79ee2c235265738e24bad2f10e787
Md5 checksum : b84e11d7ee8ee72768fe5d8c6a152f3d
Md5 checksum : 7ab5e3688f72f1546e75a536f98bcefa
CamTrace Mobile V2 Updates
The CT-Mobile application is intended for smartphones. Compatibility on tablets (Android or iOS tablets) is not guaranteed. CT Mobile V2 app is available if your CT Server is in 8.15.0 version (or higher). The CT Mobile V2 app uses the latest native decoding features integrated in mobiles. Please note: older MPG4 codecs are not supported. Note: If your CT Server is in version 8.14.1.3 (or lower), you must use the CT Mobile V1 app. Apps can be downloaded from the PlayStore/AppStore. 1 – Update the app on your smartphone (from the PlayStore/AppStore) : Your app version will appear when you launch the app (in the footer of the ‘Servers’ page). Latest versions released are : – 2.3.1-203010 (Android, APK available here), If you have enabled automatic app updates on your smartphone, your CT Mobile app should be kept up to date. In some rare cases (on some smartphones or depending on your settings), the update is not automatic. In case of problem to update the application, you can uninstall it and reinstall it from the Store. Note : If the version number (in the footer) is v1.0.0: you have an old version of smartphone app (you must update it). If you want to download the apk without using the Play/AppStore, you have to go on a site allowing the download of apk: for example on APKPURE. In this case, make a search on the following package name: “eu.camtrace.mobile“. 2 – Update the Mobile package (on the CT Server) : If your CT-Server version is atleast 9.16.2.0, you do not need to update this Mobile package. If your mobile application is version 2.1.0-201000 or higher (Android) or version 2.1.0-201002 or higher (iOS), then you are not concerned by the Mobile package update (on the CT Server). Otherwise, you must update the Mobile package (on the CT Server) by following the procedure below. This package must be uploaded on the administration web interface, in the “Help” menu, then “CamTrace Update”. To check if your CT Server has an up-to-date Mobile Package, check on the CT Server (“Help”, “About”, “List of packages”, “camtrace-mobile”) that the indicated version is identical to the version below: Md5 checksum : 2a932ee639b4982110d1a09e2d126bd2 If your CT Mobile is connected to more than one CT Server, check that the mobile package is up to date on each CT Server.To benefit from an up-to-date CT Mobile V2 application, two steps are essential :
Business softwares
CamTrace Archiver The CT Archiver (subject to licence) allows the daily archiving of CT Server recordings on an external hard disk. CamTrace Archiver (v2.4.1.0) for Windows CT-Archiver Player Playback sequences archived by CT-Archiver. CT-Archiver Player for Windows (requires the installation of 32-bits version of VLC)
Monitoring for client workstations
Standalone player
ActiveX installer